Lenovo 20AQ006HUS, 20AQ004JUS manual Config menu items continued, User Guide

Table 4. Config menu items (continued)

Menu item	Submenu item	Value		Comments
		•	Auto	If you select Auto, it
				enables you to connect and
				route appropriate USB 3.0
				or USB 2.0 connectors.
				If you select Enabled, it
				enables USB 3.0 mode
				and allows USB 3.0 to be
				supported in the operating
				system.
				If you select Disabled, it
				disables and hides the USB
				3.0 controller, and USB 3.0
				connectors will work as
				USB 2.0 connectors.
Keyboard/Mouse	TrackPoint	•	Disabled	Enable or disable the
		•	Enabled	built-in TrackPoint pointing
				device.
				Note: If you want to use
				an external mouse, select
				Disabled.
	Trackpad	•	Disabled	Enable or disable the
		•	Enabled	built-in trackpad.
				Note: If you want to use
				an external mouse, select
				Disabled.
	Fn and Ctrl Key swap	•	Disabled	If you select Enabled, the
		•	Enabled	Fn key works as the Ctrl
				key, and the Ctrl key works
				as the Fn key.
				Note: Even when Enabled
				is selected, you need to
				press Fn to resume the
				computer from sleep mode
				to normal operation.
Display	Boot Display Device	•	ThinkPad LCD	Select the display device
		•	Analog (VGA)	that is to be activated at
				boot time. This selection
		•	Digital on ThinkPad
				is effective for boot time,
		•	Display on dock	password prompt, and
				ThinkPad Setup.
				Digital on ThinkPad is the
				Mini DisplayPort connector
				on your computer.
				Display on dock is
				DisplayPort, DVI or VGA

104User Guide