LG Electronics C Series manual How to change the codes in a group, Code change in Drive group

Chapter 5. Programming keypad

5.4 How to change the codes in a group

zCode change in Drive group

1	-. In the 1st code in Drive group “0.0”,
	press the Up (S) key once.

		-. The 2nd code in Drive group “ACC” is
	2	displayed.
		-. Press the Up (S) key once.
		-. The 3rd code “dEC” in Drive group is
	3	displayed.
		-. Keep pressing the Up (S) key until the
		last code appears.
	4	-. The last code in Drive group “drC” is
		displayed.
		-. Press the Up (S) key again.
Drive group	5	-. Return to the first code of Drive group.

♣Use Down (T) key for the opposite order.

zCode change in Function group 1

When moving from the “F 0” to the “F 15” directly

	1	-. Press the Prog/Ent (z) key in “F 0”.
	2	-. 1 (the code number of F1) is displayed. Use
		the Up (S) key to set to 5.
		-. “05” is displayed by pressing the Left (W)
	3	key once to move the cursor to the left. The
		numeral having a cursor is displayed brighter.
		In this case, 0 is active.
		-. Use the Up (S) key to set to 1.
	4	-. 15 is set.
		-. Press the Prog/Ent (z) key once.
Function	5	-. Moving to F 15 has been complete.
group 1

♣Function group 2 and I/O group are settable with the same setting.

29