Chapter 5. Programming keypad
zHow to move to other groups at the 1st code of each group.
-. The 1st code in Drive group “0.0” will be displayed when AC input power is
| 1 | applied. |
| | -. Press the right arrow (X) key once to go to Function group 1. |
| 2 | -.The 1st code in Function group 1 “F 0” will be displayed. |
| -. Press the right arrow (X) key once to go to Function group 2. |
| |
| 3 | -.The 1st code in Function group 2 “H 0” will be displayed. |
| -. Press the right arrow (X) key once to go to I/O group. |
| |
| 4 | -.The 1st code in I/O group “I 0” will be displayed. |
| -. Press the right arrow (X) key once again to return to Drive group. |
| |
| 5 | -. Return to the 1st code in Drive group “0.0”. |
♣If the left arrow key (W) is used, the above will be executed in the reverse order.
zHow to move to other groups from any codes other than the 1st code
Pressing left or right arrow key in any code will return to first code of each group.
| Drive group | Function | Function |
| group 1 | group 2 |
| |
When you would like to move from the F 15 to function group 2
-. In F 15, press the Left (W) or Right arrow (X) key. Pressing the key goes to the first code of the group.
-. The 1st code in function group 1 “F 0” is displayed. -. Press the right arrow (X) key.
-. The 1st code in function group 2 “H 0” will be displayed.
