
Chapter 5. Programming keypad
5.5 Parameter setting method
zChanging parameter value in Drive group
When changing ACC time from 5.0 sec to 16.0
| | Drive group |
| 1 | -. In the first code “0.0”, press the Up (S) key once to go to the second code. |
| 2 | -. ACC [Accel time] is displayed. |
| -. Press the Prog/Ent key (z) once. |
| |
| 3 | -. Preset value is 5.0, and the cursor is in the digit 0. |
| -. Press the Left (W) key once to move the cursor to the left. |
| |
| 4 | -. The digit 5 in 5.0 is active. Then press the Up (S) key once. |
| 5 | -. The value is increased to 6.0 |
| -. Press the Left (W) key to move the cursor to the left. |
| |
| 6 | -. 0.60 is displayed. The first 0 in 0.60 is active. |
| -. Press the Up (S) key once. |
| |
| | -. 16.0 is set. |
| 7 | -. Press the Prog/Ent (z) key once. |
| -. 16.0 is blinking. |
| |
| | -. Press the Prog/Ent (z) key once again to return to the parameter name. |
| 8 | -. ACC is displayed. Accel time is changed from 5.0 to 16.0 sec. |
♣In step 7, pressing the Left (W) or Right (X) key while 16.0 is blinking will disable the setting.
Note) Pressing the Left (W)/ Right (X) /Up (S) /Down (T) key while cursor is blinking will cancel the parameter value change.