14. Specifications
Alarm | command, H/W fault | |
Stall prevention, Overload | ||
Conditions | ||
| ||
Momentary | Less than 15 msec: Continuous operation | |
power loss | More than 15 msec: Auto Restart enable |
zEnvironment
Cooling | Forced air cooling | |
method | ||
| ||
Degree of | Open, Pollution degree 2 | |
protection |
| |
Ambient | ||
temperature | ||
Storage | - 20 ~ 65°C | |
temperature | ||
Relative | Less than 90% (no condensation) | |
humidity | ||
| ||
Altitude, | 1,000m (3000 ft) above sea level, Max. 5.9m/sec2 (0.6G) | |
Vibration |
| |
Application | Protected from corrosive gas, combustible gas, oil mist or dust | |
site | ||
|
14.2 Temperature Derating Information
zLoad current VS Carrier frequency
For 0.4kW, 0.8kW, 1.5kW inverter
Load
Current
100%
For 2.2kW inverter
Load
Current
100%
80%
1kHz | 15kHz | 1kHz | 8kHz | 15kHz |
Carrier freq. |
|
| Carrier freq. |
|
Note:
1.The above graph is applied when inverter is in use within the permissible ambient temp. If the unit is installed in a panel, install it where heat dissipation is properly done to keep the panel ambient temp within permissible range.
2.This
123