LG Electronics C Series manual Changing parameter values in Function 1, 2 and I/O group

Chapter 5. Programming keypad

zChanging parameter values in Function 1, 2 and I/O group

When changing the parameter value of F 27 from 2 to 5

Function

group 1

1

2

3

4

5

6

7

8

9

10

-. In F0, press the Prog/Ent (z) key once.

-. Check the present code number.

-. Increase the value to 7 by pressing the Up (S) key.

-. When 7 is set, press the Left (W) key once.

-. 0 in 07 is active.

-. Increase the value to 2 by pressing the Up (S) key.

-. 27 is displayed

-. Press the Prog/Ent (z) key once.

-. The parameter number F27 is displayed.

-. Press the Prog/Ent (z) key once to check the set value.

-. The set value is 0.

-. Increase the value to 1 by pressing the Up (S) key.

-. Press the Prog/Ent (z) key once.

-. F27 is displayed after 5 stops blinking. Changing parameter value has been complete.

-. Press the either Left (W) or Right (X) key once to go to the first code.

-. Return to F0.

♣The above setting is also applied to change parameter values in function group 2 and I/O group.

33