Form A: System Configuration
PAGE
2 of 3
Lucent Technologies
Bell Labs Innovations
Required for PARTNER II System and PARTNER Plus System.
For additional instructions, see page 3.
9.
System Settings. Write response on line for each item.
VMS-AA:
●
●
●
●
●
●
●
●
●
●
Receptionist answers calls during business hours? Write “Yes” or “No” .
Number of Lines {#104}—By default, 2 lines per 206 module and 4 lines per 400 module
are assigned to each extension (or to pool 880 in PARTNER II Hybrid Mode). Write
number if different from default .
Transfer Return Rings {#105}—By default, a transferred call rings 4 times before going to
the transfer return extension. Write number (0-9, 0 = no return) if different from
default .
Outside Conference Denial {#109}—By default, a conference call can include 2 outside
parties. Write “No” if 2 outside parties are not allowed .
Call Coverage Rings {#116} (PARTNER II only)—By default, a covered call rings 2 times
before going to the covering extention. Write number (1-9) if different from default .
VMS Cover Rings {#117}—By default, a call rings 3 times before going to the user’s
mailbox. Write number (1-9) if different from default .
Ring on Transfer {#119}—By default, the caller hears ringing when the call is transferred.
Write “NA” if music on hold or silence is desired .
Toll Call Prefix {#402}—By default, 0 or 1 must be dialed before the area code for a
long distance call. Write “No” if 0 or 1 is not required .
System Password {#403}—By default, no password is programmed to override dialing
restrictions and to turn Night Service on and off. Write 4 digits if password is
desired .
Music on Hold {#602}—By default, the Music on Hold jack on the processor module is
active. Write “No” if the jack is deactivated .
Line Coverage. Complete items based on Line Coverage selection on Form A, Item 8.
DXD: (PARTNER II system only) If DXD is checked, specify the following:
Direct Extension Dial Delay {#112}—By default, a call rings 2 times before it is
answered by the system. Write number (0-9) if different from default .
Direct Extension Dial Record/Playback (I 892)—message of up to 20 seconds that
caller hears when call is answered with the Direct Extension Dial feature. Write
message below and record from extension 10 or 11:
If VMS-AA is checked, specify the following:
ASA:
VMS Hunt Delay {#506}—By default, VMS answers calls after 2 rings. Write “Del” if
calls ring 4 times before VMS answers .
VMS Hunt Schedule {#507}—By default, VMS is on all the time. Check if Day only or
Night only is desired:
❑Day only
❑Night only
(PARTNER II system only) If ASA is checked, specify the following:
Automatic System Answer Delay {#110}—By default, a call rings 2 times before it is
answered by the system. Write number (0-9) if different from default .
Automatic System Answer Mode {#121}—By default, ASA calls are put on hold after the
greeting plays. Check if calls should continue to ring or be disconnected:
❑Ring
❑Disconnect
ASA Record/Playback (I 891)—message of up to 10 seconds that caller hears
when the call is answered by the Automatic System Answer feature. Write
message below and record from extension 10 or 11:
10.