Initial Programming
Do Not Disturb
Used in conjunction with either automatic VMS cover or manual VMS cover, this
button lets subscribers send callers immediately to his or her mailbox (instead
of ringing the extension first).
To program a Do Not Disturb (DND) button as specified on Form C:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
Central Tel Program
].
2. Enter the number of the extension to be programmed.
3.
4.
5.
Press a programmable button with lights.
Press [
Feature
] [
0
] [
1
].
At this point, do one of the following:
Go to Step 3 of the next procedure to program another button for this
extension.
Press [
Central Tel Program
] and go to Step 2 of any button programming
procedure in this section to program a button for a different extension.
Press [
Feature
] [
0
] [
0
] to exit.
Voice Mailbox Transfer
This button lets any system user transfer calls directly to a subscriber’s mailbox,
without ringing the extension first.
To program a Voice Mailbox Transfer (VMBox) button as specified on Form C:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
Central Tel Program
].
2.
3.
4.
5.
Enter the number of the extension to be programmed.
Press a programmable button.
Press [
Feature
] [
1
] [
4
]*.
At this point, do one of the following:
Go to Step 3 of the next procedure to program another button for this
extension.
Press [
Central Tel Program
] and go to Step 2 of any button programming
procedure in this section to program a button for a different extension.
Press [
Feature
] [
0
] [
0
] to exit.
*In some countries, the feature code for Voice Mailbox Transfer is [ 1 ] [ 5 ]. Check the Programming
and Use guide for the communications system.
4-27