Initial Programming
Voice Messaging System
Programming
Language
Before you begin, locate Form 1 for the voice messaging system. Check to see
if any of the Language settings are changed from the factory defaults:
■
■
If none of the Language settings is changed, skip to “Automated
Attendant Service” and follow the instructions for Monolingual Mode.
If any of the Language settings are changed, follow the appropriate
procedure for either Monolingual Mode or Bilingual Mode.
Monolingual Mode
To change the System Language as specified on Form 1:
1.
2.
3.
4.
5.
6.
7.
8.
If necessary, access the Programming Main Menu. If you are already at
the Programming Main Menu, skip to Step 2.
a.
Press [
Intercom
] [
7
] [
7
] [
7
] or the programmed VMMsgs button.
b.
Press [
9
] [
9
] [
#
].
c.Enter the Mailbox Password and press [ # ].
d.
Press [
9
].
Press [
1
] for Language.
Press [
2
] for System Language.
Press [ 6 ] to modify System Language.
Enter the number corresponding to the System Language specified on
Form 1.
Press [ 9 ] to confirm your selection.
Press [
★
] [
7
] to return to the Programming Main Menu.
Continue with the section, “Automated Attendant Service.”
4-6