Form C4: PARTNER-6 Phone
PAGE

4 of 8

Lucent Technologies
Bell Labs Innovations
Make as many copies as you need. Use template and/or checklist.
For additional instructions, see page 8.
Template Instructions SAMPLE
If desired, write in line number, pool access code, dial code feature, or auto dial number
If desired, write in Line Ringing (Imm, Del, or No) from Form B2
If desired, write in Line Access Restriction or Pool Access Restriction
(Out, In, or No) from Form B2
Intercom Intercom
Ext.
* For PARTNER II systems in Hybrid mode only, if pool 880 is assigned, these two
buttons are associated with this pool.
Specify Automatic Line Selection:
Identify extensions programmed as shown:
Check Desired Features
Also write in extension or group number
Do Not Disturb (F 01) DND
Privacy (F 07)
Priv
VMS Cover (F 15)
VMSCover
Voice Interrupt on Busy Talk-Back (F 18) VIOB
Account Code Entry (F 12)
1
ACE
Background Music (F 19)
1
Music
Call Coverage (F 20 XX XX)
1,2,3
Cover-XX XX
Call Forwarding/Call Follow-Me (F 11 XX XX)
1,3
CF-XX XX
Call Park
(I
XX )
4
Park
Call Pickup
(I
6 XX) Pickup-XX
Conference Drop (F 06) Drop
Direct Line Pickup-Active Line
(I
68)
DLPA
Direct Line Pickup-Idle Line
(I
8) DLPI
Exclusive Hold (F 02)
ExHold
Fax Management
(I
XX)
1
FAX-XX
Group Calling-Ring/Page
(I
7 G or
I
*7 G) GCall-g
Group Hunt-Ring/Signal
(I
77 G or
I
*77 G) Hunt-g
Group Pickup
(I
66 G)
P/U Grp-g
Intercom Autodial
(I
XX or
I
*XX)
1
Ext-XX
Last Number Redial (F 05)
LNR
Loudspeaker Paging
(I
70)
Loudspk
Manual Signaling (F 13 XX or F 13 *XX)
1
MS-XX
Message Light Off (F 10 XX)
5
MsgOff-XX
Message Light On (F 09 XX)
5
MsgOn-XX
Recall (F 03) Recall
Save Number Redial (F 04)
SNR
Simultaneous Paging
(I
* 70)
SPage
Station Lock (F 21)
1
Lock
Touch-Tone Enable (F 08)
TT-EN
Voice Mail Messages
(I
777)
VMMsgs-777
Voice Mailbox Transfer (F 14) VMBox
F =Feature button G = Group I = Left Intercom button L = Line XX = Extension
1.
2.
3.
4.
5.
Button with lights is recommended, but not required.
PARTNER II system only.
You can program the origination extension only or both the origination
and destination extension.
Extension number can be programmed as Auto Dial button.
You can program the extension number.