Initial Programming
Night Service
Check Form C for extension 10. If a Night Service button is specified, follow the
procedure below.
To program Night Service on a button with lights at extension 10 as specified on
Form C:
1.
Press [
#
] [
5
] [
0
] [
3
].
2. At this point, do one of the following:
—If you want to assign Night Service to the first available button on the
system phone, press [ Next Data ] until the display reads:
Night Service
1 Assigned-Ext10
Go to Step 3.
—If you want to assign Night Service to a specific button*, press [ 3 ].
The display reads:
Night Service
3 Select Button
Press the desired programmable button with lights to assign Night
Service to that button.
3.
4.
Label the Night Service button at extension 10.
Continue with “Music On Hold” below.
Music On Hold
If desired, program Music On Hold. See the Programming and Use guide for
the communications system for instructions.
Continue with the next section, “Disallowed Phone Numbers.”
*Select button (option 3) is not available on all systems. Check the Programming and Use guide
for the communications system.
4-21