Lucent Technologies Enterprise Communications Server Routine Maintenance, Testing the Console

DEFINITY® Enterprise Communications Server Release 7	Issue 4
Console Operations 555-230-700	June 1999

6Routine Maintenance

Testing the Console 71

Routine Maintenance 6

Routine testing and cleaning for your console is quite simple. This chapter provides step-by-step procedures for testing your console, describes cleaning procedures, and discusses what you need to do in the case of a power outage.

Testing the Console

It is important for you to test your console’s display and console lamps weekly. If a problem occurs with the display or one of the lamps, notify your system manager.

To test the display and the lamps on a 302A/B console:

1.Open the panel on the front of the console (see Figure 1 on page 6 or Figure 2 on page 7).

2.Press and hold the lamp test switch (located at the left front of the console). The following should occur:

■All lamps in the display should light.

■Each row of lamps on the console and the selector console should light and go dark in sequence from top to bottom.

■The timed-reminder tone (high-pitched, .5 second tone) sounds.

3.Release the Lamp Test switch.

■Lamps return to their former state.

■The timed-reminder tone silences.

4.Close the panel.