P/N 620-000134-500 McDATA OPENconnectors Command Line Interface USER MANUAL
Preface
xiii
Forwarding
Publication
Comments
We sincerely appreciate any comments about this publication. Did
you find this manual easy or difficult to use? Did it lack necessary
information? Were there any errors? Could its organization be
improved?
Please send your comments via e-mail, our home page, or FAX.
Identify the manual, and provide page numbers and specific detail.
Thank you.
Ordering Publications To order a paper copy of this manual, contact your McDATA
representative, or use the contact information listed below.
Phone: (800) 545-5773 and select the option for information on
McDATA’s complete family of enterprise-to-edge SAN solutions.
Fax: (720) 566-3860
Trademarks The following terms, indicated by a registered trademark symbol (®)
or trademark symbol (™) on first use in this publication, are
trademarks of McDATA Corporation in the United States, other
countries, or both:
Registered Trademarks Trad ema rks
McDATA®ED-5000 Director™
Fabricenter®OPENconnectors™
Fibre Channel Director™
Intrepid™
SANpilot™
SANtegrity™
Sphereon™
All other trademarked terms, indicated by a registered trademark
symbol (®) or trademark symbol (™) on first use in this publication,
are trademarks of their respective owners in the United States, other
countries, or both.
❏E-mail: pubsmgr@mcdata.com
❏Home Page: http://www.mcdata.com
❏Fax: Technical Communications Manager
(303) 465-4996