2CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-300
2-46
FRQILJ]RQLQJUHSODFH=RQH6HW
6\QWD[ replaceZoneSet
3XUSRVH This command replaces the work area with the active zone set that is
currently loaded on the fabric.
3DUDPHWHUV This command has no parameters.
&RPPDQG([DPSOH Root> config zoning replaceZoneSet
FRQILJ]RQLQJFOHDU=RQH6HW
6\QWD[ clearZoneSet
3XUSRVH This command clears the zone set contained in the work area,
removing all zones, and takes effect immediately.
'HVFULSWLRQ This command does not change the zone set name.
3DUDPHWHUV This command has no parameters.
&RPPDQG([DPSOH Root> config zoning clearZoneSet