CLI Commands
config
2
2-17
config.security.fabricBinding.replacePending
6\QWD[ replacePending
3XUSRVH This command replaces the pending working area with the fabric
binding configuration that is currently loaded on the fabric.
3DUDPHWHUV This command has no parameters.
Root> config security fabricBinding replacePending
config.security.fabricbinding.setState
6\QWD[ setState fabricBindingState
3XUSRVH This command sets the fabric binding state for the pending fabric
binding configuration work area.
This state is not saved to the fabric until the activatePending command is
issued.
3DUDPHWHUV This command has one parameter:
Root> config security fabricBinding setstate restrict
fabricBindingState Specifies the fabric binding state for the
pending fabric binding configuration work
area. Valid values are:
inactive - Deactivate fabric binding. Switches
and directors are allowed to join the fabric
without restriction. The fabric membership list
is empty in this state and as such, the fabric
membership list is cleared when this state is
requested.
restrict - Activate fabric binding and restrict
connections. Only switches identified in the
fabric membership list may join the fabric in
this state. The fabric membership list is
automatically populated with devices attached
prior to activation, but all new members must
be manually added before connecting. The
switch must be online to complete this request.