McDATA OPENconnectors Command Line Interace - page 148

AError Messages
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-500
A-26
Message Error 237: Invalid Zoning Database
Description There was an unidentifiable problem in the local zone set work area.
Action Verify all parameters are entered correctly and re-submit. Otherwise,
the pending zone set should be cleared and reconstructed.
Message Error 238: Invalid Feature Key
Description The feature key entered is invalid.
Action Verify that the feature key was entered correctly and re-submit.
Contact your service representative with further difficulties.
Message Error 239: Fabric binding entry not found
Description The user requested to remove a fabric binding entry that is not in the
pending fabric membership list.
Action Verify that the correct entry (both WWN and Domain ID) is being
requested for removal from the list and re-submit the request.
Message Error 240: Duplicate fabric binding member
Description The user requested to add an entry to the fabric binding list that is
already a member of the list.
Action Verify that the correct entry (both WWN and Domain ID) is being
requested for addition to the list and re-submit the request.
Message Error 241: Comma-delimited mode must be active
Description Comma-delimited mode must be active to execute this command
Action Some commands require that comma-delimited mode be active (e.g.
show.nameserverExt). Enable comma-delimited mode and re-issue
the command.