CLI Commands
config
2
2-49
FRQILJ]RQLQJDGG3RUW0HP
6\QWD[ addPortMem “zoneName” domainId portNumber
3XUSRVH This command adds the domain ID and port number of a zone
member to the specified zone in the work area.
Port numbers cannot be used for zone members if the interoperability mode
for the switch or director is set to Open Fabric 1.0 mode.
'HVFULSWLRQ The CLI supports the number of zones members per zone specified
for a given product.
3DUDPHWHUV This command has one parameter.
&RPPDQG([DPSOH Root> config zoning addPortMem TheUltimateZone 10 6
zoneName Specifies the name of the zone.
domainId Specifies the domain ID of the member to be
added to the zone. Valid values are in the range
1–31.
portNumber Specifies the port number of the member to be
added to the zone. Valid port number values are:
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–31 for the ED-5000
0–63 for the Intrepid 6064
0–127 and 132–144 for the Intrepid 6140