McDATA OPENconnectors Command Line Interace FRQILJSRUWQDPH

2CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-300
2-10
FRQILJSRUWQDPH
6\QWD[ name portNumber “portName”
3XUSRVH This command sets the name for a port.
3DUDPHWHUV This command has two required parameters.
&RPPDQG([DPSOH Root> config port name 4 “Sam’s tape drive”
portNumber Specifies the port number. Valid values are:
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–144 for the Intrepid 6140
portName Specifies the name for the port. The port name
must not exceed 24 characters in length.