2CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-300
2-58
PDLQWV\VWHPUHVHW&RQILJ
6\QWD[ resetConfig
3XUSRVH This command resets all NV-RAM configuration parameters to their
default values, including feature keys and IP addresses.
'HVFULSWLRQ This command IPLs the switch. Connection from the CLI to the
switch is lost when this command runs.
This command resets all configuration data and non-volatile settings,
including network information, to their default values (factory settings).
Management access may be lost until the network information is restored.
The default values are set in the firmware of the director or switch.
For information about the default values, refer to the service manual
for your director or switch.
3DUDPHWHUV This command has no parameters.
&RPPDQG([DPSOH Root> maint system resetConfig
PDLQWV\VWHPVHW2QOLQH6WDWH
6\QWD[ setOnlineState onlineState
3XUSRVH This command sets the switch online or offline.
3DUDPHWHUV This command has one parameter.
&RPPDQG([DPSOHV Root> maint system setOnlineState true
Root> maint system setOnlineState 1
onlineState Specifies whether the switch is online. Valid
values are true and false. Boolean 1 and 0 may be
substituted as values.