CLI Commands
perf
2
2-65
2XWSXW([DPSOH The output from the perf.link command displays as follows.
Port 2
Statistic Count
----------- ----------
OLS In 753452
OLS Out 351269
Reset In 2953184
Reset Out 1842953
Link Flrs 2953184
Sync Losses 1842953
Sig Losses 35246
SHUIWUDIILF
6\QWD[ traffic portNumber
3XUSRVH This command displays port traffic counters for a single port.
3DUDPHWHUV This command has one parameter.
&RPPDQG([DPSOH Root> perf traffic 2
Sync Losses The number of times the port has detected a
loss of synchronization timeout while not in an
offline or LF2 state.
Sig Losses The number of times the port has detected a
loss of signal while not in an offline or LF2 state.
portNumber Specifies the port number. Valid values are:
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–144 for the Intrepid 6140