1Introduction
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-500
1-2
&RPPDQG/LQH,QWHUIDFH2YHUYLHZ
The Command Line Interface (CLI) is a feature that provides an
alternative to McDATA’s Enterprise Fabric Connectivity Manager
(EFCM) and SANpilot interface products for director and switch
management capabilities.
The CLI can only be used through a Telnet client session in an
out-of-band management environment, using the Ethernet port in the
director or switch. Although the primary use of the CLI is in
host-based scripting environments, the CLI commands can also be
entered directly at a command line. Any hardware platform that
supports the Telnet client software can be used.
The primary purpose of the CLI is to automate management of a
large number of switches with the use of scripts.
Because the CLI is not an interactive interface, no prompts are
displayed to guide the user through a task. If an interactive interface
is needed, the EFCM or SANpilot interface should be used instead of
the CLI.