CLI Commands
perf
2
2-61
3DUDPHWHUV This command has one parameter.
&RPPDQG([DPSOH Root> perf class3 2
2XWSXW The port Class 3 counter data is displayed as a table that includes the
following statistics, along with a wrap count for each corresponding
counter.
2XWSXW([DPSOH The output from the perf.class3 command displays as follows.
portNumber Specifies the port number. Valid values are:
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–144 for the Intrepid 6140
Port The port number.
RxFrames The number of Fibre Channel Class 3 frames
that the port has received.
TxFrames The number of Fibre Channe l Class 3 frames
that the port has transmitted.
RxWords The number of Class 3 4-byte words within
frames that the port has received.
TxWords The number of Class 3 4-byte words within
frames that the port has transmitted.
Disc Frames The number of Class 3 frames that have been
discarded upon receipt by this port. There are
no FBSYs (Fabric Busy link response) or FRJTs
(Frame Reject link response) generated for Class
3 frames.
Port 2
Statistic Wrap Count
----------- ---------- ----------
RxFrames 3 2953184
TxFrames 2 1842953
RxWords 65 2953184
TxWords 32 1842953
Disc Frames 26 2953184