2CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-300
2-26
FRQILJVHFXULW\XVHU5LJKWV
config.security.userRights.administrator
6\QWD[ administrator “username” “password”
3XUSRVH This command sets the name and password for administrator-level
access.
'HVFULSWLRQ Immediately after the name and password for the administrator is
set, you are prompted to log in with the new access rights.
3DUDPHWHUV This command has two parameters.
&RPPDQG([DPSOH Root> config security userRights administrator
“Administrator” “newpassword”
username Specifies the new user name for
administrator-level login. Default is set to
Administrator. This parameter is 1–15 characters.
Valid characters include all characters in the
USASCII character set, excluding control
characters and spaces. Spaces are not valid even
though quotation marks are used.
password Specifies the password for administrator-level
login. Default is set to password. This parameter
is 1–15 characters. Valid characters include all
characters in the USASCII character set,
excluding control characters and spaces. Spaces
are not valid even though quotation marks are
used.