2CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-300
2-40
2XWSXW([DPSOH The output from the config.switch.show command displays as
follows.
BB Credit: 2
R_A_TOV: 20
E_D_TOV: 4
Preferred Domain Id: 1
Switch Priority: Principal
Speed: 2 Gb/sec
Rerouting Delay: Enabled
Interop Mode: Open Fabric 1.0
Insistent Domain Id: Disabled
Domain RSCN: Enabled
FRQILJV\VWHPFRQWDFW
6\QWD[ contact “systemContact”
3XUSRVH This command sets the system contact attribute.
3DUDPHWHUV This command has one parameter.
&RPPDQG([DPSOH Root> config system contact “Joe”
Insistent Domain
Id When enabled, ensures that the embedded
firmware cannot change a switch’s preferred
domain ID.
Domain RSCN When enabled, allows domain RSCNs to be sent
to registered members of the fabric.
systemContact Specifies the new system contact string for the
director or switch. The contact can contain
0–255 characters.