Chapter 6: Using the Software
Setting and Downloading User Defaults
The Download User Defaults command allows you to maintain a known working configuration that is specific to your VOIP system. You can then experiment with alterations or improvements to the configurations confident that a working configuration can be restored if necessary.
1.Before you can use the Download User Defaults command, you must first save a set of configuration parameters by using the Save Setup command in the sidebar menu of the MultiVOIP software.
Figure 6-25: Save & Reboot
2.Before the setup configuration is saved, you will be prompted to save the setup as the User Default Configuration. Select the checkbox and click OK.
A user default file will be created. The MultiVOIP unit will reboot itself.
3.To download the user defaults, go to Start Programs MultiVOIP x.xx Download User Defaults.
4.A confirmation screen will appear indicating that this action will entail rebooting the MultiVOIP.
Figure 6-26: Confirmation screen
Click OK.
5. Progress bars will appear during the file transfer process.
Figure 6-27: Progress bars
6. When the file transfer process is complete, the Dialog / IP Parameters screen will appear.
Figure 6-28: Dialog screen
7.Set the IP values per your particular VOIP system. Click OK. Progress bars will appear as the MultiVOIP reboots itself.
123 |
