Multi-Tech Systems MVP210/410/810-FX manual Add/Edit Outbound Phone Book Field Definitions, Fields

		Chapter 5: Phonebook Configuration
	Add/Edit Outbound Phone Book: Field Definitions
Field Name	Values	Description
Accept Any	Y/N	When checked, “Any Number” appears as the value in the Destination
Number		Pattern field.
		The Any Number feature works differently depending on whether or not an
		external routing device is used (Gatekeeper for H323 protocol, Proxy for SIP
		protocol, Registrar for SPP protocol).
		When no external routing device is used. If Any Number is selected,
		calls to phone numbers not matching a listed Destination Pattern will be
		directed to the IP Address in the Add/Edit Outbound Phone Book screen.
		“Any Number” can be used in addition to one or more Destination Patterns.
		When external routing device is used. If Any Number is selected, calls to
		phone numbers not matching a listed Destination Pattern will be directed to
		the external routing device used (Gatekeeper for H323 protocol, Proxy for
		SIP protocol, Registrar for SPP protocol). The IP Address of the external
		routing device must be set in the Phone Book Configuration screen.
Destination	prefixes,	Defines the beginning of dialing sequences for calls that will be connected to
Pattern	area codes,	another VOIP in the system. Numbers beginning with these sequences are
	exchanges,	diverted from the PSTN and carried on Internet or other IP network.
	line numbers,
	extensions
Total Digits	as needed	Number of digits the phone user must dial to reach specified destination. This
		field not used in North America
Remove Prefix	dialed digits	Portion of dialed number to be removed before completing call to destination.
Add Prefix	dialed digits	Digits to be added before completing call to destination.
IP Address	n.n.n.n	The IP address to which the call will be directed if it begins with the
		destination pattern given.
Description	alpha-numeric	Describes the facility or geographical location at which the call will be
		completed.
Protocol Type	SIP or H.323	Indicates protocol to be used in outbound transmission. Single Port Protocol
	or SPP	(SPP) is a non-standard protocol designed by Multi-Tech. The –SS models
		only support SIP and the –FX models do not support H.323.
H.323	fields	The –SS and –FX models do not support H.323
Use Gatekeeper	Y/N	Indicates whether or not gatekeeper is used.
Gateway H.323	alpha-numeric	The H.323 ID assigned to the destination MultiVOIP. Only valid if “Use
ID		Gatekeeper” is enabled for this entry.
Gateway Prefix	numeric	This number becomes registered with the GateKeeper. Call requests sent to
		the gatekeeper and preceded by this prefix will be routed to the VOIP
		gateway.
H.323 Port	1720	This parameter pertains to Q.931, which is the H.323 call signaling protocol
Number		for setup and termination of calls (aka ITU-T Recommendation I.451). H.323
		employs only one “well-known” port (1720) for Q.931 signaling. If Q.931
		message-oriented signaling protocol is used, 1720 must be chosen as the
		H.323 Port Number.
Table is continued on	next page…

Multi-Tech Systems, Inc. 83