Chapter 4: Configuring your VOIP
Voice/Fax
Setting the Voice/FAX Parameters. The Voice/Fax section needs to be set for each channel to be used. However, once you have established a set of Voice/FAX parameters for a particular channel, you can apply this entire set of Voice/FAX parameters to another channel by using the Copy Channel button and its dialog box. To copy a set of Voice/FAX parameters to all channels, select “Copy to All” and click Copy.
The majority of the settings should be left at their default settings as changes often introduce problems with signal quality. In each field, enter the values that fit your particular setup. The
Figure 4-2: Voice/Fax parameters
The Voice/FAX Parameters settings are described in the tables below.
35 |
