Chapter 4: Configuring your VOIP
The fields of the RADIUS screen are described in the table below.
|
|
Field Name | Values |
Enable Accounting | Y/N |
|
|
Server Address | n.n.n.n |
|
|
Accounting Port | 1 - 65535 |
|
|
Retransmission |
|
Interval |
|
|
|
Number of | 0 - 255 |
Retransmissions |
|
|
|
Shared Secret | |
|
|
Select Attributes | |
(button) |
|
|
|
RADIUS Screen Field Definitions
Description
When checked, the MultiVOIP will access the accounting functionality of the RADIUS server.
IP address of the RADIUS server that handles accounting (billing) for the current MultiVOIP unit.
TDM time slot at which RADIUS accounting information will be transmitted and received.
If the MultiVOIP sends out a packet to the RADIUS server and doesn't receive a response in the retransmit interval, it will retransmit that packet again and wait the retransmit interval again for a response. How many times it does this is determined by the setting in the Number of Retransmissions field.
Client encryption key for the current VOIP unit.
Gives access to RADIUS Attributes screen. On Attributes screen, one can specify the parameters to be tallied by the RADIUS server for accounting (usually billing) purposes.
The RADIUS dialog box has a secondary dialog box, RADIUS Attributes, that allows you to customize accounting information sent to the RADIUS server by the MultiVOIP. The MultiVOIP software logs data about many aspects of the call traffic going through the MultiVOIP. The RADIUS Attributes screen lets you pick which aspects will be included in the accounting reports sent to the RADIUS server.
“RADIUS Attributes” Definitions
Field |
| Description | Field |
| Description | |||
Select All |
| Log report to include all fields | Start Date, Time | Date and time the phone call began. | ||||
|
|
| shown. |
|
|
|
| Voice or fax. |
Channel |
| Data channel carrying call. | Call Mode |
| ||||
Number |
|
|
|
|
|
| Total packets received in call. | |
Duration |
| Length of call. | Packets Received | |||||
Packets Sent |
| Total packets sent in call. | Bytes Received |
| Total bytes received in call. | |||
Bytes Sent |
| Total bytes sent in call. | Coder |
| Voice Coder /Compression Rate used for | |||
|
|
|
|
|
|
|
| call will be listed in log. |
Packets Lost |
| Packets lost in call. | Prefix Matched |
| When selected, the phonebook prefix | |||
|
|
|
|
|
|
|
| matched in processing the call will be listed |
|
|
|
|
|
|
|
| in log. |
Outbound |
| DTMF digits received by this | Call Status |
| Successful or unsuccessful. | |||
Digits Sent |
| gateway from remote gateway |
|
|
|
|
| |
|
|
| (if that DTMF set to "Out of |
|
|
|
|
|
|
|
| Band"). |
|
|
|
|
|
Server Details |
| The IP address of the traffic control | server being used will be displayed here if the call is handled | |||||
|
|
| through that server. The Options field refers to | |||||
|
|
| activated. For example, with H.323, various H.323 Version 4 options might be listed. | |||||
|
|
| From Details |
|
|
|
| To Details |
Gateway |
| Originating gateway |
| Gateway |
| Completing or answering gateway | ||
Number |
|
|
|
| Name |
|
|
|
IP Address |
| IP address where call originated. |
| IP Address |
| IP address where call was completed/answered. | ||
Descript |
| Identifier of where call originated. |
| Descript |
| Identifier of where call was completed/answered. | ||
Options |
| When selected, log will not use |
| Options |
| When selected, log will not use Silence | ||
|
| Silence Compression and Forward |
|
|
| Compression and Forward Error Correction by | ||
|
| Error Correction by call originator. |
|
|
| party answering call. | ||
69 |
