Chapter 6: Using the Software

Registered Gateway Details

The Registered Gateway Details screen presents a real-time display of the special operating parameters of the Single Port Protocol (SPP). These are configured in the Call Signaling screen and in the Add/Edit Outbound Phone Book screen.

Figure 6-7: Registered endpoints

Registered Gateway Details: Field Definitions

Field Name

Values

Column Headings

Description alphanumeric

IP Address

n.n.n.n

Port

n

Register

 

Duration

 

Status

Registered/

 

unregistered

No. of Entries

 

Details

Count of

Registered

Numbers

List of

Registered

Numbers

Description

This is a descriptor for a particular VOIP gateway unit. This descriptor should generally identify the physical location of the unit (e.g., city, building, etc.) and perhaps even its location in an equipment rack.

The RAS address for the gateway.

Port by which the gateway exchanges H.225 RAS messages with the gatekeeper. The time remaining in seconds before the TimeToLive timer expires. If the gateway fails to reregister within this time, the endpoint is unregistered.

The current status of the gateway either registered or unregistered.

The number of gateways currently registered to the Registrar. This includes all SPP clients registered and the Registrar itself.

If a registered gateway is selected (by clicking on it in the screen), The "Count of Registered Numbers" will indicate the number of registered phone numbers for the selected gateway. When a client registers, all of its inbound phonebook's phone numbers become registered.

Lists all of the registered phone numbers for the selected gateway.

Multi-Tech Systems, Inc.

111

Page 111
Image 111
Multi-Tech Systems MVP210/410/810-SS, MVP210/410/810-FX manual Registered Gateway Details