Multi-Tech Systems MVP210/410/810-SS manual Configuring your Voip, Dtmf Tone Pairs, Low Tones

			Chapter 4: Configuring your VOIP
		FXO Supervision Parameter Definitions (continued)
Field Name	Values		Description
Disconnect	Supervision fields
DTMF Tone			Enables supervision of call disconnection using DTMF tones.

DTMF Tone Pairs

High Tones

				Low Tones
1	2	3	A	697Hz
4	5	6	B	770Hz
7	8	9	C	852Hz
*	0	#	D	941Hz
1209Hz	1336Hz	1447Hz	1633Hz

Disconnect	1st tone pair	These are DTMF tone pairs.
Tone	+	Values for first tone pair are: *, #, 0, 1-9, and A-D.
Sequence	2nd tone pair	Values for second tone pair are: none, 0, 1-9, A-D, *, and #.
		The tone pairs 1-9, 0, *, and # are the standard DTMF pairs found on
		phone sets. The tone pairs A-D are “extended DTMF” tones, which
		are used for various PBX functions.
Tone Detection	Y/N	Enables supervision of call disconnection by detecting cessation of a
		pre-specified tone from the PBX.
Available	dial tone,	List from which tones can be chosen to signal call disconnection.
Tones	ring tone,
	busy tone,
	unobtainable tone
	(fast busy),
	survivability tone,
	re-order tone
Disconnect	any tone from	Currently chosen disconnection supervision tone.
Tones	Available Tones list

Multi-Tech Systems, Inc. 48