Chapter 4: Configuring your VOIP
Interface
The Telephony Interface parameters are set individually for each channel and include the line types as well as some specific situational settings for those that need them. The kinds of parameters for which values must be chosen depend on the type of telephony supervisory signaling or interface used (FXO, E&M, etc.). Here you will find the various parameters grouped and organized by interface type. Note that the SS and FX models only support FXS/FXO. In each field, enter the values that fit your particular setup. Once you have established a set of Interface parameters for a particular channel, you can apply this entire set of Voice/FAX parameters to another channel by using the Copy Channel button and its dialog box. To copy a set of Interface parameters to all channels, select “Copy to All” and click Copy. The screen below shows more options available than are actually used for clarity. Your settings will determine what fields are available. The
Figure 4-3: Telephony parameters
40 |
