Chapter 4: Configuring your VOIP
Save Settings
Save & Reboot
Saving the MultiVOIP Configuration. When values have been set for all of the MultiVOIP’s various operating parameters, click on Save Setup in the sidebar, then Save & Reboot.
Creating a User Default Configuration. When a “Setup” (complete grouping of parameters) is being saved, you will be prompted about designating that setup as a “User Default” setup. A User Default setup may be useful as a baseline of
Connection
Settings
This is also accessible from the Start menu in the MultiVOIP software folder.
Set Baud Rate. The Connection option in the sidebar menu has a “Settings” item that includes the baud- rate setting for the COM port of the computer running the MultiVOIP software.
First, it is important to note that the default COM port established by the MultiVOIP program is COM1. Do not accept the default value until you have checked the COM port allocation on your PC. To do this, check for COM port assignments in the system resource manager of your Windows operating system. If COM1 is not available, you must change the COM port setting to a COM port that you have confirmed as being available on your PC.
Figure 4-25: COM port setup
75 |
