Muratec F-100, F-150 Daylight SavingOff, Program/Enter, Daylight SavingOn, Your Fax Number, 1.11

4	The LCD now asks whether you want to set the calendar/clock for automatic
	recognition of daylight saving time (DST).
			Daylight Saving:Off
				Program/Enter
	When the setting is On, your machine automatically will set itself to DST or to
	standard time, depending upon the calendar setting, at 2 AM on the appropriate
	“switchover” Sundays each year.
	When the setting is Off, no such automatic change will occur.
	(We have provided this choice because some areas do not observe DST.)
	If the setting you see is acceptable, skip to step 6.
	Otherwise, proceed to step 5.
5	To change the setting, press or /PROGRAM once or twice until your choice
	appears (here, we’ve changed the setting to On):
			Daylight Saving:On
				Program/Enter
6 Press ENTER to save the setting and continue.
7	The LCD now asks you to enter your fax number as you want it to appear on
	other fax machines’ displays or printouts. The fax industry term for this num-
	ber is Subscriber ID.
			Your Fax Number
8
	Use the numeric keypad to enter the desired number. To put in a dash for
	easier reading, as shown here, press DIALING OPTIONS once. The number may
	contain up to 20 characters (numbers and dashes).
			Your Fax Number
		972-555-5525
	Note: If you make a mistake, press CANCEL to erase leftward. Or, if you want
				to change just one character in the number, press to move the cur-
				sor leftward, or /PROGRAM, to move it rightward, to that character.
				Then re-enter until the fax number is just as you want it.

9 Press ENTER to save the number.

Getting started

10 The LCD now asks you to enter the name you want it to appear at the top of faxes you send. The name may be up to 22 characters in length.

Important: You enter letters and other non-numeric characters through the one-touch keys.

Your Name :Upper

_

The word “Upper” means the machine is currently set for entering only upper-case letters. If you press R, the machine will see it as an R (not an r).

To change it so that pressing a one-touch key will produce a lower-case letter rather than an upper-case letter, press U2/abc. The display will change to:

Your Name :Lower

_

This means pressing one-touch keys will enter lower-case letters: pressing R will produce an r (not an R) on the display.

To switch back for upper-case entries, press U1/ABC.

To enter spaces, punctuation and symbols, press U3/SYMBOL. This lets you enter the blue characters shown on the one-touch keypad.

In “Beyond the Basics,” we’ll show you how to use the CODE function at

U4/CODE to enter a wide variety of characters (see page 2.3). For now, how- ever, become familiar with the ABC, abc and SYMBOL keys.

Note: If you make a mistake, press CANCEL to erase leftward. Or, if you want to change just one character in the name, press to move the cursor leftward, or /PROGRAM, to move it rightward, to that character.

Then re-enter until the name is just as you want it.

11 Press ENTER to save the setting and continue.

12 The LCD now indicates the type of dialing, tone or pulse, for which your fax machine is set:

Phone Type: Tone

Program/Enter

If the setting you see is acceptable, skip to step 14.

Otherwise, proceed to step 13.

1.11