Muratec F-120 Attaching an optional handset, Attaching a second phone, Installation complete

2	If the volume you hear is satisfactory, skip to step 4. Otherwise, go on to step 3.
3	Adjust the volume as you wish:
	To turn the volume up, press /PROGRAM. To turn the volume down, press .

The display, or LCD, indicates the volume. Here are the possible settings:

Getting started

2 Using the plug mentioned in step 1, plug the phone cable from your second phone into the EXT. TEL jack on the rear of your fax machine.

** Tel Mode ** Volume:n n n n n n

** Tel Mode ** Volume:n n n n

** Tel Mode ** Volume:n n

** Tel Mode ** Volume:

=Loudest setting.

=Medium setting.

=Low setting.

=Volume off.

For information on how to use a connected second phone with your fax machine, see “Receiving faxes,” beginning on page 1.18.

Attaching an optional handset

If you purchase an optional handset for your fax machine, it comes with installation instructions. However, here is a summary of how to attach the handset.

Important: Do not connect the handset directly to a telephone wall jack. Connect the handset only to your fax machine as the instructions describe.

4 Press MONITOR/CALL again to hang up.

Attaching a second phone

Want to attach a second phone (even a cordless model!) to your fax machine, so they can share the same phone jack? No problem.

Before we go further, let’s explain the idea. You’re plugging the second phone’s phone line into your fax machine’s EXT. TEL jack, not the wall phone jack. In such a setup, only your fax machine connects to the wall. The second phone receives phone signals through your fax machine.

Now, let’s proceed …

1 If your second phone is already plugged into a wall phone jack, disconnect it from that jack, at the jack. Hold onto the phone plug; you’ll need it in step 2.

Note: Of course, if your second phone is a model which also requires AC power, as is true for the base of a cordless phone, don’t unplug it from its AC power jack!

1 Using a small Phillips-head screwdriver, attach the handset cradle to the side of your fax machine using the screws included with the cradle.

LINE EXT.TEL HANDSET

2 Plug one end of the handset cord (it’s curled) into the HANDSET jack on the rear of your fax machine.

3 Plug the other end of the handset cord into the jack on the handset. If con- nected to a phone line, your fax machine is now “off-hook.”

Note: The handset has a small “flash” button which you can press while holding the handset, putting the fax machine back “on-hook” until you can hang up the handset properly in step 4.

4 Place the telephone handset onto the handset cradle. The cradle will press the handset’s “flash” button, hanging up the handset.

Installation complete!

Now, see how our EasyStart feature will have you up and running — within just minutes.

1.9