Muratec F-120, F-150 Erasing a document stored in a batch box, Erase Batch Doc Enter Box No, 2.27

Use the numeric keypad to enter the document’s two-digitfile number (00–39). If the file number is 00–09,be sure to enter the leading zero.

Beyond the basics

Erasing a document stored in a batch box

It’s easy to erase a document stored in a batch box set up on your fax machine:

1

2

3

Press /PROGRAM, N, 6, ENTER. The LCD will show:

Erase Batch Doc.

Enter Box No. _

Use the numeric keypad to enter the number (1–5)of the batch box currently “holding” the document you wish to erase.

Press ENTER. The LCD will show:

Erase Batch Doc.

Enter File No. _

4

5 Press ENTER. The fax machine now gives you one last chance to change your mind about the erasure.

Erase Batch Doc.

Check Program/Enter

Important: To quit the operation without erasing this particular document, press /PROGRAM and go back to step 4.

Important: To quit the operation without erasing this or any other docu- ment, press STOP. The machine will return to standby mode.

6 Press ENTER. The fax machine will erase the desired document, then return to standby mode.

2.27