Muratec F-150 Loading paper, When you install a new drum cartridge, Loading the paper cassette

4 Unpack the toner cartridge from its carton. Then, holding the toner cartridge with both hands, shake it well as shown (note the arrows).

5 Install the toner cartridge in the printer, making sure that the cartridge’s four pins (two each at the front and rear sides) fit in the slits inside the printer frame.

6 Swing the printer cover back down. Push down on a portion of the cover to lock the cover into its normal position.

Note: The fax machine will not work if the cover isn’t closed properly.

Getting started

Loading paper

Of course, one of your fax machine’s most outstanding features is how it prints faxes and makes copies on plain paper! Now, everything that comes out of your fax machine is ready for distribution or archiving, right from the start.

The following instructions tell you how to load the recording paper — the paper on which the fax machine makes its printouts (copies and received faxes). Your machine can hold up to 650 sheets at a time: 500 sheets in the paper cassette and 150 sheets in the multipurpose tray.

Loading the paper cassette

1 Pull forward on the paper cassette to slide it out.

2 Insert up to 500 letter-sizedsheets into the cas- sette, placing the edges of the top sheet under the metal tabs on the left side of the cassette (viewed from the cassette’s front, as shown).

Important: Be sure to load the cassette with only letter-sized paper.

3 Push the paper cassette back into its original

(closed) position. You’ll feel a click when it’s properly in place.

Loading the multipurpose tray

You may use either letter- or legal-sized paper in the multipurpose tray, but not both at the same time; don’t mix the sizes.

When you install a new drum cartridge

Important: Use this setting only when you are installing a new drum cartridge.

Your fax machine keeps track of how many pages go through the drum cartridge to let you know when the drum needs to be replaced. Thus, whenever you install a

1	Adjust the multipurpose tray for the
	length of paper you plan to load. Pull

slightly upward on the paper-length guide in the cassette, then slide the guide to the slot (either LTR or LGL) for the paper size you’ll be loading.

Paper-width guide

Paper-length guide

new drum cartridge, you must “notify” the machine by resetting the drum counter. (Obviously, before doing so the very first time, you’ll have to finish installing the machine and then turn it on [see page 1.8].) Here’s how to reset this counter:

1 Press /PROGRAM, J, 2, 1, ENTER. The LCD will show:

Reset Drum Life

Check Program/Enter

2 Press ENTER to reset the drum counter.

Important: You must set your machine to recognize the size of paper you’ve loaded (see page 1.8 for details).

2 Slightly “fan” the paper you will be loading, to help ensure smooth feeding.

3 Insert up to 150 sheets of paper into the tray. Make sure the paper-length guide and the paper-width guide now fit against the paper’s edges.

Important: To avoid paper jams, do not refill this tray without first remov- ing all of any paper which may remain in it. In other words, don’t just add sheets to an already-loaded stack.

1.7