Muratec F-150, F-100, F-120 Corrective cleaning, Curing frequent jams in the document feeder, 3.12

Just in case …

Corrective cleaning

Here are some simple cleaning procedures for keeping your fax machine operating smoothly. Use each as the need arises.

Curing frequent jams in the document feeder

If you’re having trouble with getting your original documents to feed properly, try this procedure:

1 Turn off your fax machine.

2 Get two soft, lint-free cloths and moisten them as follows:

•One with a cleaner suitable for use on platen/rubber rollers

•The other with isopropyl alcohol

3 Open the scanner cover by holding the scanner cover release.

Important: You must hold the cover open. It won’t stay open by itself.

4 Use the cloth with the rollers cleaner to clean the face of the rollers. Rotate the rollers

by hand to allow cleaning of the entire roller surface.

5 Use the cloth with the isopropyl alcohol to clean the contact glass.

6 Gently close the scanner cover, making sure both sides are snapped down securely.

If you have unsatisfactory printout quality

Your machine automatically cleans its charger and transport roller, two items which are very important to printout quality. So, if you notice poor printout quality (whether on received faxes or on copies), it may mean that your machine requires service. Review “Print quality problems” (pages 3.4–3.5), and see whether any of the proposed solutions helps your machine. If none does, please call your authorized Muratec dealer or call the Muratec Customer Support Center at (972) 364-3350.

3.12