Muratec F-100, F-150, F-120 manual One-touch phone dialing, Katz’s Cat Care A4 Normal, 2.11

3 Toggle between transmission from the feeder or from memory if necessary, by

pressing MEMORY TRANSMIT.

4 Press the one-touch key in which you’ve stored the number.

Beyond the basics

The machine will handle the call from here, although the exact sequence of events will vary depending upon whether you specified transmission from memory or transmission from the feeder:

If you specified transmission from memory:

•Your fax machine scans your document into memory first, then dials the other fax machine.

•The LCD shows the Location ID and the document’s width and resolution settings:

Katz’s Cat Care

A4 Normal

Note: If the number doesn’t have a Location ID, the number appears.

•When the other machine answers, your fax will transmit the document directly from memory. (To review memory transmission, see pages 1.14–1.15.)

If you specified transmission from the feeder:

•Your fax machine dials the other fax machine.

•When the other machine answers, your fax feeds the document through its scan- ner, transmitting as it goes.

•The LCD shows the Location ID and the document’s width and resolution settings:

Katz’s Cat Care

A4 Normal

Note: If the number doesn’t have a Location ID, the number appears.

One-touch phone dialing

To dial a phone call using a one-touch number, you must have an optional handset attached to your machine. (Contact your authorized Muratec dealer for more infor- mation on this optional item.)

Here’s how to make the call:

1 Obtain a dial tone by doing one of the following:

•Lifting the handset

•Press MONITOR/CALL to use the monitor speaker.

2.11