Muratec F-100 Activating or turning off the department code setting, Set. Dept. Protect, 2.56

Beyond the basics

2	Press /PROGRAM repeatedly until you see the code you wish to clear.
3	Press CANCEL.

To clear another department code, repeat steps 2–3.

To finish clearing department codes, press STOP to return to standby mode.

Activating (or turning off) the department code setting

1 Press /PROGRAM, M, 3, ENTER. The LCD shows:

Dept. On/Off: Off

Program/Enter

Note: If department code operation is protected (see next item), the fax will beep briefly and then return to standby mode. You will have to turn off the protection first, then repeat this step.

2 Press or /PROGRAM once or twice until you see the setting you want.

Dept. On/Off: On

Program/Enter

3 Press ENTER.

Activating (or turning off) department code protection

Important: This feature will work only if you’ve set the passcode (see page 2.44).

1 Press /PROGRAM, M, 1, ENTER. The LCD shows:

2 Use the numeric keypad to enter the four-digit passcode:

Set. Dept. Protect

To change only one digit, repeatedly press to move leftward or /PROGRAM to move rightward until the cursor is under the digit, then use the numeric keypad to enter the correct digit.

3 Press ENTER.

Dept. Protect: Off Program/Enter

2.56