7 Scanner cover release — Pull up on this to open the scanner cover.

8 Scanner cover — Open this (by using the scanner cover release) to provide access to the original document (what you put into the machine for faxing or copying) during occasional jams.

9 Document feeder — The slot into which you place your original document for faxing or copying. It holds up to 50 sheets.

10 Document guides — You can adjust these to adjust for the width of the original document so it will feed properly into the machine.

11 Document hopper — Supports the original document for straighter feeding into the machine. (You can flip it shut if there’s no original document loaded.)

12 Document tray — Supports documents discharged from the original docu- ment exit.

13 Original document exit — Where the original document comes out.

14 Multipurpose tray — One of two locations where you put the recording paper (the paper cassette is the other). Holds up to 150 sheets, either letter- or legal-sized.

15 Paper cassette — One of two locations where you put the recording paper (the multipurpose tray is the other). Holds up to 500 letter-sized sheets.

16 AC power switch — Turns your fax machine on and off.

Getting started

17

LINE EXT.TEL HANDSET

20 19 18

17 AC power jack — Where you plug in the AC power cord.

18 HANDSET jack — Where you plug in the optional handset.

19 EXT. TEL jack — If you connect a second telephone to your machine, this is where you plug in the cord.

20 LINE jack — Where you plug in the telephone line cord. (The other end of the cord plugs into a wall telephone jack.)

1.3

Page 11
Image 11
Muratec F-120, F-150, F-100 manual Line EXT.TEL Handset