Muratec F-120 Using speed-dial numbers, Erasing a one-touch number, Tel Mode, Select One-Touch

Beyond the basics

2 Press the one-touch key in which you’ve stored the number. As the machine dials, it will show the number on the LCD:

** Tel Mode ** 9-555-2842_

Note: Remember that your fax machine’s monitor speaker is not a speakerphone; so, if you dialed by using the monitor speaker, be sure to pick up the hand- set and speak to the other person when he/she answers!

Note: You also can use this method to dial a fax call when, for some reason, you want to hear the other fax’s answering fax tones. (Make sure there’s a docu- ment in the feeder.) When you do hear those tones, press START to send the document in the feeder; if you’d lifted the handset, hang it up at this point.

Erasing a one-touch number

1 Press /PROGRAM, A, 2, ENTER. The LCD shows:

Select One-Touch	or	Select One-Touch
A :No Number Stored		A :9-1-555-345-6789

If A is the key you want to erase, skip to step 3. (However, our examples from here will say “B” rather than “A.”)

2 Press the key for the one-touch number you want to erase. Here, we’ve selected B:

Select One-Touch

B :9-1-555-987-6543

3 If you change your mind and wish to erase the number stored in a different one-touch key, just press that key before going on step 4.

4 Press ENTER. The LCD shows:

Erase One-Touch

Check Program/Enter

Important: If you want to quit without erasing the one-touch number you’ve selected, press /PROGRAM. The fax will return to step 2.

5 Press ENTER to erase the number.

Erase One-Touch

** Complete **

To erase another one-touch number, repeat steps 2–5. Or press STOP to return to standby mode.

Printing a list of your one-touch numbers

Whoops! Forgot which number is “in” which one-touch key? Don’t worry: just print a list of your one-touch numbers. The list includes each key’s letter, the Location ID (if any), number and group number[s] (if any) you’ve stored in the key.

To print the list, press /PROGRAM, A, 3, ENTER.

Using speed-dial numbers

As we mentioned before, your fax machine will store up to 140 speed-dial numbers, designated by three-digit identifier codes from 001 (the first number) through 140.

Important: When entering the identifier code for a speed-dial number, you must enter leading zeroes, if necessary, to make three digits (e. g., 001 or 027). Of course, speed-dial numbers 100–140don’t require leading zeroes.

Entering or changing a speed-dial number

Important: To erase a number, see “Erasing a speed-dial number” (pages 2.14–2.15).

1	Press /PROGRAM, B, 1, ENTER. Depending on whether you already have a
	number entered for speed-dial number 001, the LCD shows:
		Enter Speed-Dial	or	Enter Speed-Dial
		No.		No.

If 001 is the speed-dial number you want to set, skip to step 3. (However, our examples from here will say “005” rather than “001.”)

2 Use the numeric keypad to enter the desired speed-dial number’s three-digit identifier code. Here, we’ve entered 005 and the LCD shows either:

Enter Speed-Dial	or	Enter Speed-Dial
No.		No.

3 If you change your mind and wish to select a different speed-dial number, just repeat step 2 until the desired number appears, then go on to step 4.

4 Press ENTER. Depending on whether you already have a number entered for this speed-dial number, the LCD now shows either:

005:Fax Number	or	005:Fax Number
_		9-555-397-0123_

2.12