MENU
Page 14
KeyFob Transmitters as Zone Input Devices
(Refer to display above: press the PRIOR button to go backwards).
Each of the 4 keyfob buttons can be assigned to a zone. For example, On button = point 1; Off button = point 2; A1 = point 3; A2 = point 4. Up to 48 keyfobs (using 1 button) or 24 keyfobs (using 2 buttons) or 14 keyfobs (using all 4 buttons) or any combination up to a maximum of 48 controlled zones can be assigned, providing multiple wireless panic buttons on a system, each reporting to a Central Station or a pager and/or annunciating on a keypad the keyfob zone number with a description. To assign a keyfob to a zone: program the keyfob as you would a transmitter, entering the keyfob's ID code, check sum and point number at the appropriate zone. The “Quick Method” is not allowed. The zone may be hardwired to an electrical sensor as well as assigned to a keyfob (either one will activate the zone alarm output). NOTE: If assigning a keyfob to a zone, the “ON/OFF” buttons on the keyfob will no longer arm/disarm the system. The keyfob is converted to a “panic only” device.
Enter Zone Descriptions
001 - |
| • | Press 1and 2to place the cursor and; press |
|
|
| 3and 6to select the character. |
| (Direct Entry) | • For each zone, enter a description of up to two lines. | |
| • Press Uto save each description. | ||
|
| ||
| WI818G 10/05 |
|
|
DATA | AUX 1/AUX 2 OPTIONS |
ENTRY |
|
0 | None |
1 | Relay Group 1 Toggle |
2 | Relay Group 2 Toggle |
9 | Panic |
A | Auxiliary |
B | Instant |
C | Aux. Output Toggle |
D | Access on Aux. Output |
E | Arm STAY ("K Series" |
| Keypads Only) |
F | Interior Bypass |
| ("Classic" RP Series |
|
|
PROGRAM
•To proceed to the next description, place the cursor under the Zone Number (e.g. “01”) and change the Zone Number using 3and 6. Program new description as above.
•NOTE: Zone Descriptions can only be entered through the
KEYPAD EASY
Enter Date
( / / )
(Direct Entry)
Enter Time
( : )
(Direct Entry)
Enter Date (Press Rto set cursor).
•Enter the current date in the format MM/DD/YY. (MM = month, DD = day and YY = year.
•Press Uto save. Press the NEXT/YES button to proceed.
Enter Time (Press Rto set cursor.)
•Enter the current time in format HH:MMA/P, where HH=hours
•Select AM or PM by pressing any number button to toggle selection.
•Press Uto save. Press the NEXT/YES button to proceed.
RP1CAE2/GEM-K1CA
Dealer Code 456789
DEALER CODE RE - ENTER
Dealer Code
•Directly enter the Dealer Code (default = 456789), using 0through 9buttons.
•Press Uto save.
•
•Press Uto save.
•Press the NEXT/YES button to proceed.
GEM-
EXIT DEALER PROGRAM MODE: This completes the custom default program. Press Cto enter the Direct Address Program Mode for further programming or press Conce again to end all programming and resume normal keypad operation.
CLEAR PROGRAM: Should it be necessary to create a new custom default program, (a) from the Dealer Program Mode, press Cto enter the Address Program Mode; (b) access Location 4091 (Clear Program) or 4093 (Cold Start); (c) press Uand then (d) press Cto exit the Dealer Program Mode. A “SYSTEM
|
|
|
| Clear Dealer Program (Erases Dealer Program) |
| 4091 | XX | H | Use this feature to erase the Panel Program, while maintaining Scheduled Data and Zone Descriptions. Access |
|
|
|
| address 4091 and press U. Data entry is not allowed. NOTE: Enter Easy Menu Driven Program Mode |
|
|
|
| to reprogram system. |
|
|
|
| Cold Start (Erases Entire Program) |
| 4093 | XX | H | |
| This erases all programmed data (Dealer Program, Zone Description Data and Schedules). Access ad- | |||
|
|
|
| dress 4093 and press U. Data entry is not allowed. NOTE: Some features (schedules) can only be pro- |
|
|
|
| |
|
|
|
| grammed again with the Downloading Software. |
LNAPCO Security Systems |
