Napco Security Technologies GEM-P3200 quick start Area System Trouble Reporting Options

WI818G 10/05											Page 29
	AREA SYSTEM TROUBLE REPORTING OPTIONS (ADDRESS 1120 - 1137)
	SYSTEM RESPONSE				AREA 1 SYSTEM EVENT/TROUBLE
		ADDR		KEYPAD		KEYPAD	KEYPAD	KEYPAD	FAIL TO	FAIL TO
	ACTIVATED BY AREA 1		AMBUSH								RSRVD.
				PANIC		FIRE	AUX.	TAMPER	OPEN	CLOSE
	EVENT/TROUBLE		1	2		3	4	5	6	7	8
	Pulsed Burg. Output	1120				Default ON
	Burglary Output	1121		Default ON			Default ON
	Fire Output (Lug E9)	1122
	Reset Relay	1123
	Auxiliary Relay	1124
	Report Alarm Telco 1	1125
	Report Alarm Telco 3	1127
			Defaults as	noted from		address 1120	-1127]
	SYSTEM RESPONSE				AREA 2 SYSTEM EVENT/TROUBLE
	ACTIVATED BY AREA 2	ADDR	AMBUSH	KEYPAD		KEYPAD	KEYPAD	KEYPAD	FAIL TO	FAIL TO	RSRVD.
				PANIC		FIRE	AUX.	TAMPER	OPEN	CLOSE
	EVENT/TROUBLE		1	2		3	4	5	6	7	8
	Pulsed Burg. Output	1130				Default ON
	Burglary Output	1131		Default ON			Default ON
	Fire Output (Lug E9)	1132
	Reset Relay	1133
	Auxiliary Relay	1134
	Report Alarm Telco 1	1135		Default ON		Default ON	Default ON
	Report Alarm Telco 3	1137

[Defaults as noted from address 1130-1137]

1.Select the desired option entering the option number (1-8) for each digit.

2.Enter corresponding option number in address location.

NOTE: Dark shaded data value box shows option not available.

3.Press Uor Dto save.

AREA SYSTEM TROUBLE REPORTING OPTIONS

LNAPCO Security Systems XGEM-P3200 Programming Instructions