Napco Security Technologies GEM-P3200 ID NUMBERS TELCO 3 & CS REPORTING CODES, Cs Subscriber

ID NUMBERS (TELCO 3) & CS REPORTING CODES

Page 24									WI818G 10/05
			CS SUBSCRIBER ID NUMBERS (ADDRESS 0790 - 0857)
CS TELCO 3 SUBSCRIBER OPENING/CLOSING ID NUMBERS
		AREA 1				AREA 2
	ADDRESS 0790-0793				ADDRESS 0794-0797
		(DIGITS 1-4)				(DIGITS 1-4)
	0790	0791	0792	0793	0794	0795	0796	0797

CS TELCO 3 SUBSCRIBER EVENT ID NUMBERS

	AREA 1				AREA 2				SYSTEM
ADDRESS 0822-0825				ADDRESS 0826-0829				ADDRESS 0854-0857
	(DIGITS 1-4)				(DIGITS 1-4)				(DIGITS 1-4)
0822	0823	0824	0825	0826	0827	0828	0829	0854	0855	0856	0857

Default for CS Telco 1 Subscriber Event ID Number (Area 1) depends on Easy Menu Question “ACCOUNT #”. [Default = blank (•) blank (•) blank (•) blank (•)] for all other ID Numbers.

CS TELCO SUBSCRIBER ID NUMBERS: Enter the Subscriber Opening/Closing and Event ID Numbers for any of the 3 CS Receivers.

1.Enter 3 or 4 digits (depending on the CS receiver format) for each subscriber number from left to right. NOTE: Leave trailing boxes blank (•).

2.Valid entries are: 1-9, 0 and B-F. NOTE: A is not permitted. Press [Enter] or ON/OFF] to save.

CS REPORTING CODES (ADDRESS 0859 -0883)

CS SUBSCRIBER

ALARM/TROUBLE		ADDRESS		OPENING/CLOSING	ADDRESS 0864-0883
		0859-0862
REPORTING CODES				REPORTING CODES
	LEFT	ADDR	RIGHT
						ADDR
Cancel	blank (•)	0859		Closing	blank (•)	0864
Alarm Restore	blank (•)	0860
				Conditional Closing	blank (•)	0865
Trouble	blank (•)	0861
				Opening	blank (•)	0866
Trouble Restore	blank (•)	0862
				Opening after Alarm	blank (•)	0867
[Default = blank (•) blank (•) from address 0859-0883]				Fail to Open		0868
				Fail to Close		0869
				Telemetry Trouble		0882
				Telemetry Fail		0883

CS SYSTEM REPORTING CODES:

1.Enter in corresponding address loca- tion (left and right digits).

NOTE: Left digit is the first digit and right digit is the second digit in a two digit CS receiver format.

2.Valid entries are: 1-9, 0 and B-F.

NOTE: A is not permitted.

3.To disable a code leave boxes blank

(•).

NOTE: Dark shaded data value box shows option not available.

4.Press Uor Dto save.

XGEM-P3200 Programming Instructions LNAPCO Security Systems