Napco Security Technologies GEM-P3200 quick start Relay # Area Timeout Event ID, None

WI818G 10/05						Page 49
	EXTERNAL RELAY CONTROL
		RELAY EVENT OPTIONS
	RELAY #	AREA	TIMEOUT	EVENT ID	COND.
	See	See	See	See	See
	Table 1 below	Table 2 below	Table 3 below	Table 4 on page 50	Tables 5A & 5B on
					page 51

		TABLE 1
	RELAY MAPPING
DATA ENTRIES				RELAY #
LEFT		RIGHT
blank (•)		blank (•)		None *
blank (•)		1		1
blank (•)		2		2
blank (•)		3		3
blank (•)		4		4
blank (•)		5		5
blank (•)		6		6
blank (•)		7		7
blank (•)		8		8
blank (•)		9		9
blank (•)		0		10
blank (•)		B		11
blank (•)		C		12
blank (•)		D		13
blank (•)		E		14
blank (•)		F		15
1		blank (•)		16
1		1		17
1		2		18
1		3		19
1		4		20
1		5		21
1		6		22
1		7		23
1		8		24
* Note: [blank		(•) blank (•)]	option affects the
relay with the same entry number. All other
options affect the relay number specified. Ex:
Suppose Relay/Entry 1 is mapped to External
Relay 1 and Relay/Entry 2 is mapped to
External Relay 24. The data entries are as
follows: Address 3778 = [blank (•) blank (•)] and
Address 3779 = [1C].

Areas

1-2

TABLE 2 (AREAS 1-2)

AREAS CONTROLLING RELAY

SHUTOFF ON DISARM

RIGHT DATA	AREA 1	AREA 2
ENTRY
blank (•)	NONE
1	Y
2		Y
3	Y	Y

Note: “Y” indicates option is enabled.

TIMEOUTS: Each relay event can be assigned a timeout depending on Alarm Type option.

If Alarm Type is selected for timeout in

minutes or seconds, enter the 3-digit time- out duration in corresponding address location. To choose seconds or minutes, see step 5A on page 51. Maximum entry is 254.

EXTERNAL RELAY CONTROL

For a desired relay not listed:				Quotient	Left Digit
A. Choose a desired relay, ex: 60
B. Divide it by 16	16	60
			48	Remainder	Right Digit

Continued

LNAPCO Security Systems XGEM-P3200 Programming Instructions