Napco Security Technologies GEM-P3200 quick start Cs Zone Reporting Codes Address

REPORTING CODES

Page 26

WI818G 10/05

CS ZONE REPORTING CODES (ADDRESS 0910 - 0957)

ADDRESS 0910-0917

ADDRESS 0918-0921

ADDRESS 0922-0925

ZONES REPORT CODE (CONTROL PANEL)

ZONES REPORT CODE (GROUP 1)

ZONES REPORT CODE (GROUP 2)

ZONE 1

ZONE 2

ZONE 3

ZONE 4

ZONE 5

ZONE 6

ZONE 7

ZONE 8

ZONE 9

ZONE 10

ZONE 11

ZONE 12

ZONE 13

ZONE 14

ZONE 15

ZONE 16

0910

0911

0912

0913

0914

0915

0916

0917

0918

0919

0920

0921

0922

0923

0924

0925

	ADDRESS 0926-0929						ADDRESS 0930-0933						ADDRESS 0934-0937						ADDRESS 0938-0941
ZONES REPORT CODE (GROUP 3)						ZONES REPORT CODE (GROUP 4)						ZONES REPORT CODE (GROUP 5)						ZONES REPORT CODE (GROUP 6)
ZONE 17		ZONE 18	ZONE 19	ZONE 20		ZONE 21		ZONE 22	ZONE 23	ZONE 24		ZONE 25		ZONE 26	ZONE 27	ZONE 28		ZONE 29		ZONE 30	ZONE 31	ZONE 32
0926		0927	0928		0929	0930		0931	0932		0933	0934		0935	0936		0937	0938		0939	0940		0941

	ADDRESS 0942-0945						ADDRESS 0946-0949						ADDRESS 0950-0953						ADDRESS 0954-0957
ZONES REPORT CODE (GROUP 7)						ZONES REPORT CODE (GROUP 8)						ZONES REPORT CODE (GROUP 9)						ZONES REPORT CODE (GROUP 10)
ZONE 33		ZONE 34	ZONE 35	ZONE 36		ZONE 37		ZONE 38	ZONE 39	ZONE 40		ZONE 41		ZONE 42	ZONE 43	ZONE 44		ZONE 45		ZONE 46	ZONE 47	ZONE 48
0942		0943	0944		0945	0946		0947	0948		0949	0950		0951	0952		0953	0954		0955	0956		0957

	Default for Group Zone Report Codes depends on Easy Menu Question “RCVR. FORMAT”.
ZONE REPORT		NOTE: Zones 1-8 are included in the control panel and Zones 9-32 are EZM Zones.
CODE OPTIONS
DATA ENTRIES		Zones 33-48 are wireless. See Address 2555-2560 to enable “EZM Zone Groups”.

CS ZONE

DATA
ENTRIES	MODEM CODE

1Fire *

2Panic

3Burglary

4Hold up

7Gas Alarm

8Heat Alarm

0Auxiliary Alarm

B 24 Hour Auxiliary

PULSE EVENT CODE will be the first digit of the 2 digit reporting code. The second digit will be the second digit of the reporting zone. For example, for zone 9 (address 0918), if the right digit is “3", then the reporting code is “39”. With another example, for zone 15 (address 0924), if the right digit is “4", then the reporting code is “45”.

MODEM CODES determine the zone types reported for the following formats: SIA and ADEMCO Point ID.

1.Select the desired Modem Code for each zone from the table shown.

2.Press Uor Dto save.

XGEM-P3200 Programming Instructions LNAPCO Security Systems