Napco Security Technologies GEM-P3200 0900, CHexadecimal Format, Direct Address, Program Mode

WI818G 10/05 Page 17

advance to the data field.

5.Press 015. The numbers 015 will appear on the keypad display indicating the number of seconds entered.

6.Press Uto save. Address 2406 is now programmed with a 15-second Abort Delay.

7.Enter another 4-digit address to continue programming or press Cto exit and resume normal keypad operation.

C)Hexadecimal Format

Data such as Report Codes displays, accepts data by means of a Hexadecimal display. Data is entered directly, by pressing keys 1 – 9, G0for zero, and G1through G5for hex B through F (11-15), with the

cursor automatically moving to the right upon key press. See table below.

HEXADECIMAL ENTRIES

ENTRY	PRESS	KEYPAD	ENTRY	PRESS	KEYPAD
TOTAL	N	DISPLAYS	TOTAL	N	DISPLAYS
blank	0	•	8	8	8
1	1	1	9	9	9
2	2	2	10	G 0	0
3	3	3	11	G 1	B
4	4	4	12	G 2	C
5	5	5	13	G 3	D
6	6	6	14	G 4	E
7	7	7	15	G 5	F

EXAMPLE: HEXADECIMAL Format with the GEM-RP1CAe2/GEM-K1CA: Program an Ambush CS Reporting Code to be

"1B".

DIRECT ADDRESS

0900	- -	H
Address	DATA ENTRY LOCATION:
0900	Hex Format
"Ambush"	• No data yet entered

DETERMINE THE DATA ENTRIES

	0900	1 B		H
Address			DATA ENTRY LOCATION:
0900				Hex Format
"Ambush"		Press 1G1in order to set
		"Ambush" Reporting code to "1B". The "H"
		on the right indicates "Hexadecimal" format.

PROGRAM MODE

Referring to CS REPORTING CODES in the Programming Worksheets that follow, Ambush is located at address 0900. In the "Keypad Reporting Codes" table, the data entries needed to assign a code of "1B" are "1" and "G1".

KEYPAD REPORTING		ADDRESS
		0900-0904
CODES
	LEFT		ADDR	RIGHT
Ambush	1		0900	B
Panic
			0901
Fire
			0902
Auxiliary
			0903
Tamper
			0904

LNAPCO Security Systems XGEM-P3200 Programming Instructions