Napco Security Technologies GEM-P3200 System Options Address, Emergency Free Access Address

WI818G 10/05 Page 41

SYSTEM OPTIONS (ADDRESS 2423)

SYSTEM OPTION:

1.Select the System Option from the table shown and enter in the corresponding address location at right. Keypad Blank- ing will clear all data from the LCD display (and turn off all keypad LED's) after the system is armed and delay time has ex- pired. The display will re-appear when an exit/entry door is faulted, causing an entry time delay display, or if a valid user code is entered at the keypad while the system is armed.

2.Press Uor Dto save. NOTE: Dark shaded data value box shows option not available.

	ADDRESS 2423
	SYSTEM OPTIONS
DATA ENTRIES	OPTION
RIGHT
1	Enable ACM Access
2	RESERVED
3	Enable TCP/IP Communications
4	TCP/IP Panel/Site Initiated Functions
5	RESERVED
6	RESERVED
7	RESERVED
8	Enable Keypad Blanking

EMERGENCY FREE ACCESS (ADDRESS 4080)

ENABLE ACM OPTION:
1. Select the Emergency Free Access
		ADDRESS 4080
Zone Number (001-048) and enter corre-	Emergency
sponding address location at right.	Free Access
	Zone Number
2. Press Uor Dto save.
	[Default = 000]

ACM OPTIONS

LNAPCO Security Systems XGEM-P3200 Programming Instructions