WI818G 10/05 | Page 15 |
DIRECT ADDRESS PROGRAM MODE
DIRECT ADDRESS OVERVIEW
Direct Address Programming allows you to go directly to the address locations (up to 4095) and change the data entries manually in order to customize your control panel options. Whereas the Easy Menu Program Mode guides you through limited selections to get you started, Direct Address Program Mode allows you to change all options directly. It con- sists of up to 4095 address locations each with data entry locations as shown in the following diagram (below left). The data entry location accepts data in one of three formats: Binary, Decimal and Hexadecimal (explained below in "Address Mode Displays"). The following diagram (below right) illustrates a Decimal format data entry location (using a
ADDRESS
LOCATIONS
0000
0000
TO
4095
DATA ENTRY
LOCATION
DATA ENTRY LOCATION:
(One of three formats):
•Binary (Bit)
•Decimal
•Hexadecimal
0 0 0 0 |
| 0 6 0 | D |
= ADDRESS LOCATION
= DATA ENTRY LOCATION
DIRECT ADDRESS
ADDRESS MODE DISPLAYS
There are three types of address displays when programming in Direct Entry Program Mode, as follows:
A) Binary (Bit) Format
Settings (such as Zone Features) display and accept data in "number" format. For example, Zone Features are turned on by the pressing of keypad buttons 1 through 8, with the activated Zone(s) displaying the corresponding decimal digit (replacing deactivated zones which are signified by dashes).
EXAMPLE: BIT Format with the
PROGRAM MODE
1218 - - - - - - - - B
|
|
|
|
|
Address |
| DATA ENTRY LOCATION: | ||
1218 |
|
| Binary (Bit) Format | |
"Exit/Entry |
| • No zones yet activated | ||
Follower" |
|
|
| |
|
|
|
|
|
DETERMINE THE DATA ENTRIES
1218 - 2 - 4 5 - 7 - B
|
|
|
|
Address |
| DATA ENTRY LOCATION: | |
1218 |
| Binary (Bit) Format | |
"Exit/Entry |
| Press 245and 7in | |
Follower" |
| order to activate Zones 2, 4, 5, and 7. (The "B" | |
|
|
| |
|
|
| on the right indicates "Binary" format). |
|
|
|
|
Referring to ZONE FEATURES in the Programming Worksheets that follow, the Exit/Entry Follower for Zones 1 through 8 are located at address 1218.
LNAPCO Security Systems |
