Napco Security Technologies GEM-P3200 ZONE OPTIONS / ZONES 1 - 16 ADDRESS, Zone Options / Zones

See Zone Options on Page 33.

Page 30 WI818G 10/05

ZONE OPTIONS / ZONES 1 - 16 (ADDRESS 1200 -1386)

ZONE OPTIONS / ZONES 1-16

				ZONES 1			8						ZONES 9				16
ZONE OPTIONS	ADDR	Z1	Z2	Z3	Z4	Z5	Z6	Z7	Z8	ADDR	Z9	Z10	Z11	Z12	Z13		Z14	Z15	Z16
		1	2	3	4	5	6	7	8		1	2	3	4		5	6	7	8
50ms Loop Response (A)	1200
20ms Loop Response (A)	1201
Priority	1202									1302
Priority with Bypass	1203									1303
Auto-Bypass	1204									1304
Selective Bypass	1205									1305
Keyswitch Arming	1206									1306
Auto-Bypass Re-entry	1207									1307
Pre-Alarm Warning	1208									1308
Never Arm	1209									1309
24-Hour Zone	1210									1310
Burg. Alarm Output	1211									1311
Pulsed Alarm Output	1212									1312
Fire Output (Lug E9)	1213									1313
Reset Relay	1214									1314
Auxiliary Relay	1215									1315
Entry/Exit 1	1216									1316
Entry/Exit 2	1217									1317
Exit/Entry Follower	1218									1318
Auto Reset	1219									1319
Swinger Shutdown	1220									1320
Chime	1221									1321
Abort Delay	1222									1322
Power-up Delay	1223									1323
Day Zone Open	1224									1324
Day Zone Short	1225									1325
Alarm on Day Zone	1226									1326
RPT Alarm Tel 1	1227									1327
RPT Alarm Restore Tel 1	1228									1328
RPT Trouble Tel 1	1229									1329
RPT Trouble Restore Tel 1	1230									1330
RPT Alarm Tel 3	1235									1335
RPT Alarm Restore Tel 3	1236									1336
RPT Trouble Tel 3	1237									1337
RPT Trouble Restore Tel 3	1238									1338
No EOL Resistor	1239									1339
Sensor Watch	1240									1340
Trouble on Open	1241									1341
Trouble on Short	1242									1342
Trouble on Night Open	1243									1343
Zone Area 1	1244									1344
Zone Area 2	1245									1345
2-Wire Smoke Detectors (B)	1252
RESERVED	1253									1353
Zone ANDing Group 1	1254									1354
Zone ANDing Group 2	1255									1355
Interior #1 Bypass	1262									1362
Interior #2 Bypass	1263									1363
Keypad Sounder on Alarm	1264									1364
Fire (C)	1275									1375
Fire Alarm Verification (C)	1276									1376
Interior (STAY) Bypass	1284									1384
Chime 2	1286									1386

When the Easy Program Menu is used, these features are enabled by default (for new panels or after a Cold Start (address 4093)). Zone Area 1 is enabled for the first 8 zones only, by default

Do not program if "K Series" keypads (with "P" and "Q" buttons) are used in the system.

Disable Auto-Reset on non-fire zones for SIA CP-01 installations.

In UL installations, all Fire Zones must also be programmed for "Pulse Burg Output Cadence" (Address 2422, press 1 (bit zero)).

XGEM-P3200 Programming Instructions LNAPCO Security Systems